Kramer Electronics 104R - Manual (Page 8)

104R - Connecting the 104R 5
4 Connecting the 104R
Always switch off the power to each device before connecting it to your
104R. After connecting your 104R, connect its power and then switch
on the power to each device.
To connect the 104R as illustrated in the example in Figure 2 :
1. Connect the TV source (for example, a satellite receiver)
to the “F” type
INPUT connector.
2.
Connect one or more of up to 4 of the following “F” type OUT connectors to
the respective TV acceptors:
You do not have to connect all the outputs.
 OUT 1 to TV acceptor 1 (for example, a TV)
 OUT 2 to TV acceptor 2 (for example, a TV)
 OUT 3 to TV acceptor 3 (for example, a recorder)

OUT 4 to TV acceptor 4 (for example, a TV)
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Switch on the TV source and the TV acceptors.
The RF INPUT signal automatically distributes to the TV acceptors.
i