Australian Monitor Integrator Rack - Manual (Page 6)

4 Removing the corner covers
The bottom piece will need the corner covers removed just like the top piece.
This will allow you access to mounting the frame’s side pieces to the top and
bottom.
5 Installing the Wheels/Stand offs
The wheels or stand offs mount to the bottom of the bottom piece. The stand
offs simply screw into the bottom piece. The wheels on the other hand will need
to be screwed into the based with the 16 x M6x10 silver self tapping screws.
PAGE 6 INTEGRATOR RACKS INSTALLATION AND OPERATION MANUAL
PREPARING THE BOTTOM PIECE