Australian Monitor Integrator Rack - Manual (Page 3)

INTEGRATOR RACKS
The Australian Monitor Integrator range of equipment racks are a
sturdy and professional rack mounting solution.
Available in wall mount versions of 6 and 12 rack unit heights and
with three floor mount variants in 18, 32 and 45 rack units, the
Integrator range of racks give the AV contractor the features they
require in a reliable cost effective racking solution.
Revision 1.0 November 2011
INTRODUCTION 3
UNPACKING 4
PREPARING THE TOP PIECE 5
PREPARING THE BOTTOM PIECE 6
PREPARING THE DOOR/LOCKS 7
PREPARING THE SIDE PANEL 8
MAKING THE FRAME 9
MOUNTING THE DOORS 10
SPECIFICATIONS 11
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Rating plate and caution marking are marked on the back enclosure of the apparatus
PAGE 3 INTEGRATOR RACKS INSTALLATION AND OPERATION MANUAL
INTRODUCTION AND CONTENTS