Australian Monitor AMISCL2 - Manual (Page 7)

A M I S C L 2 I N S TA L L AT I O N & O P E R AT I O N M A N UA L
PAG E 7
S P E C I F I C AT I O N S
AU D I O I N P U T
Type RF-filtered, Servo-balanced input stage
Impedance 60K
Ω
balanced
Nominal Operating Level -10dBu to +4dBu
Maximum Input Level +21dBu balanced and unbalanced
CMR @ 1kHz >40dB
D E T E C TO R I N P U T
Type DC de-coupled, unbalanced input
Impedance >20K
Ω
Maximum Input Level +21dBu
AU D I O O U T P U T
Type Electronically buffered output stage
Impedance <40 Ω
Maximum Input Level +21dBu
Bandwidth 5Hz to 50kHz, +0, -1dB
THD @ +4dBu 0.05% typ.
THD @ +20dBu 0.1% typ.
IMD (SMPTE) @ +10dBu 0.01% typ.
Noise & Hum, unity gain >93dBu
Noise & Hum, fully off >97dBu
Crosstalk @ 20kHz >85dBu
CMR @ 1kHz >60dBu
C O M P R E S S O R S E C T I O N
Type IKC (Interactive Knee Control) Compressor
Threshold Variable (-40 to +20dBu)
Ratio Variable (1:1 to LIM.)
Attack Variable (0.1 to 200 msec./20dB)
Release Variable (-20 to +20dB)
G AT E S E C T I O N
Type IRC (Interactive Ratio Control) Expander/Gate
Threshold Variable (Off to +10dBu)
DY N A M I C E N H A N C E R S E C T I O N
Type Dynamically Controlled Frequency Correction
Process Variable (Off to 6)
F U N C T I O N S W I T C H E S
In/Out Bypass switch
Auto Programme-dependent attack and release times
I N D I C ATO R S
CLOSE LED LED indicates onset of the Expander/Gate
8 element GAIN REDUCTION meter 1/2/4/6/10/15/20/30dB
P OW E R S U P P LY
Mains Voltages 100-120/200-240 VAC 50-60Hz
Power Consumption 9 Watts
Fuse 320mA (100-120V); 160mA (200-240V) slow-blow
Mains Connection Standard IEC receptacle
P H Y S I C A L
Dimensions H x W x D 13/4” (44.5mm) x 19” (482.6mm) x 8.5” (217mm)
Net Weight 3kg
Shipping Weight 4.3kg
As a result of these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or shown.