Australian Monitor EQ302 - Manual (Page 3)

EQ302
The Australian Monitor EQ302 is a dual 30 band, 1/3 octave, constant
Q graphic equaliser with excellent performance and functionality
and is suitable for both installation and PA use. The equaliser has a
comprehensive set of features including 45 mm faders with +/- 15
dB of adjustment and offers balanced XLR, 6.35 mm TRS and Phoenix
connectors on both the input and output to provide ease of installation.
The EQ302’s Constant Q design means that there is minimum
interaction between filters, thus providing an improved clarity and
intelligibility of sound and more accurate adjustment over the 1/3
octave frequency bandwidth of each of its 30 ISO centred filters.
The high pass and low pass contour filters provide the added advantage
of being able to fine tune your sound to suite your required ambiance
without interfering with the previously equalised room settings. A high
pass filter allows for the removal of subsonic frequencies that may
cause damage to speaker systems.
The Australian Monitor EQ302 has features usually associated with
equalisers many times the price and represents excellent value for
money for both permanent installations and operators alike.
Revision 1.0 October 2012
INTRODUCTION 3
FEATURES 4
UNPACKING 5
FRONT PANEL 6
REAR PANEL 7
MOUNTING 8
ABOUT EQUALISERS 9
SPECIFICATIONS 10
NOTES 11
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
ADVERTISSMENT: POUR ÈVITER LE RISQUE
D’INCENDIE OU DE CHOCS ÈLECTRIQUES,
NE PAS EXPOSER CET APPARIEL À LA PLUIE
OU À L’HUMIDITÈ.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Rating plate and caution marking are marked on the back enclosure of the apparatus
PAGE 3 EQ302 INSTALLATION AND OPERATION MANUAL
INTRODUCTION AND CONTENTS