ATEN NETTM SN0108 - Manual (Page 66)

SN0108 / SN0116 User Manual
56
6. When the HyperTerminal screen appears, open the File menu and select:
Properties
→ Settings. The following dialog box displays:
7. Change the settings (if necessary), so that they match the settings shown in
the dialog box, then click ASCII Setup... The ASCII Setup dialog box
comes up:
:
8. Change the settings (if necessary), so that they match the settings shown in
the dialog box, then click OK.
sn816.book Page 56 Thursday, December 13, 2007 5:16 PM