Asus K7V - Manual (Page 71)

ASUS K7V User’s Manual 71
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
VGA BIOS Sequence [PCI/AGP]
If your computer has both PCI and AGP VGA cards, this field allows ¥ou to
select which of the cards will act as your primary graphics card. [AGP/PCI]
uses the AGP card as your primary card. The default, [PCI/AGP], allows
your PCI graphics card to take precedence when detected. Configuration
options: [PCI/AGP] [AGP/PCI]
IRQ XX Used for Legacy Device [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by an onboard legacy (non-PnP) ISA device. The default value
indicates either that the displayed IRQ is not used or that ISA Configuration
Utility (ICU) is being used to determine if an ISA device is using that IRQ.
Configuration options: [No/ICU] [Yes]
PCI/PNP IRQ Resource Exclusion