Asus K7V - Manual (Page 33)

ASUS K7V User’s Manual 33
3. HARDWARE SETUP
Expansion Cards
3. H/W SETUP
3.7.3 Accelerated Graphics Port Pro (AGP Pro)
This motherboard provides an Accelerated Graphics Port Pro (AGP Pro) slot to sup-
port AGP/AGP Pro graphics cards, such as an ASUS AGP-V6800DDR/64M.
CAUTION! To avoid damaging your AGP/AGP Pro graphics card, your computer’s
power supply should be unplugged before inserting your graphics card into the slot.
K7V Accelerated Graphics Port (AGP PRO)
TOP VIEW
Rib (inside slot) Rib
20-pin bay 28-pin bay
AGP Card without Retention Notch
0 1 0 1 0 1
K7V
®
3.7.4 Audio Modem Riser (AMR) Slot
This connector supports a specially designed audio and/or modem card called an AMR.
Main processing is done through software and controlled by the motherboard’s sys-
tem chipset. This provides an upgradeable audio and/or modem solution at an incred-
ibly low cost. There are two types of AMR, one defined as primary and another de-
fined as secondary. This motherboard uses the primary channel so that a secondary
AMR can coexist without the need to disable the onboard CODEC. The motherboard’s
onboard CODEC (optional) must be disabled when using a primary AMR.
NOTE: An AMR is not included with this motherboard.
0 1 0 1 0 1
K7V
®
K7V Audio Modem Riser (AMR) Slot
CAUTION! The AGP Pro slot is shipped with a safety tab on the 20-pin bay for
use with AGP cards without a retention notch. DO NOT remove this tab if you
will be using such cards; removing may cause these cards to shift, which may
cause damage to your card, slot, and motherboard. Remove
ONLY when you will be using an AGP Pro card. Use a rigid tip,
such as a pen tip, to dislodge and remove the tab from the bay.
Removing the tab