Asus K7V - Manual (Page 7)

ASUS K7V User’s Manual 7
1. INTRODUCTION
Sections/Checklist
1.1 How This Manual Is Organized
This manual is divided into the following sections:
1. INTRODUCTION Manual information and checklist
2. FEATURES Product information and specifications
3. HARDWARE SETUP Instructions on setting up the motherboard
4. BIOS SETUP Instructions on setting up the BIOS software
5. SOFTWARE SETUP Instructions on setting up the included software
6. SOFTWARE REFERENCE Reference material for the included software
7. APPENDIX
Optional items and general reference
1.2 Item Checklist
Check that your package is complete. If you discover damaged or missing items,
please contact your retailer.
1.2.1 Motherboard
(1) ASUS Motherboard
(1) Universal Retention Mechanism
(1) ASUS 2-port USB Connector Set
(1) 40-pin 80-conductor ribbon cable for internal UltraDMA/66
or UltraDMA/33 IDE drives
(1) Ribbon cable for master and slave IDE drives
(1) Ribbon cable for (1) 3.5” floppy disk drive
(1) Bag of spare jumper caps
(1) Support CD with drivers and utilities
(1) This Motherboard User’s Manual
ASUS 3-port USB Connector Set
ASUS IrDA-compliant infrared module (optional)
ASUS PCI-L101 Wake-On-LAN 10/100 Fast Ethernet Card (optional)
1. INTRODUCTION
IMPORTANT: It is strongly recommended that at least a 200-watt (235W for full
configuration) ATX power supply be used for this motherboard. Make sure that
your ATX power supply can supply at least 20 amperes on the +5-volt lead and at
least 10mA (750mA recommended) on the +5-volt standby lead (+5VSB) (see 19)
ATX Power Suppy Connector in 3.8 External Connectors). Your system may
become unstable/unreliable and may experience difficulty in powering up if your
power supply is inadequate.