Nilfisk-ALTO NEPTUNE 8 User Manual

Page 11

english

Options / model variants

NEPTUNE 5 / 7 / 8

1. Open cabinet (and service door

if desired - see chapter 3.6, Step
1+2).

2. Turn the twist grip on the safety

control block all the way to the left
(counter- clock wise-direction).

3. Turn the main switch to position

4. Select temperature (over 100°C

(212°F)).

For special applications: replace the
standard nozzle with the steam spray
nozzle (accessory).



4.2

Switching on the
cleaner

4.2.1 Cold water operation /

Hot water operation (up
to 100°C)

1. Turn the main switch to posi-

tion

(cold water).

Control electronics accomplishes
a self check.
The Display shows for approx. 1
second „---“.
The motor starts.

is ON.

2. Turn the main switch to posi-

tion

(hot water).

3. Select temperature.

4. Unlock the spray gun and

squeeze trigger.

5. The oil burner will light.

6. Release trigger and lock the

spray gun when not in use.

NOTE!
The cleaner switches off auto-
matically twenty seconds after
the spray gun has been closed. To
start the cleaner again, squeeze
the trigger and the machine will
start automatically.

4.3 Pressure

regulation

(Tornado Lance)

1. Turn the twist grip on the spray

unit:

– High pressure =

clockwise (+) for high pres-
sure

– Low pressure =

counter-clockwise (–) for low
pressure.

4.2.2 Steam operation (over

100°C (212°F))

BAR