Asus K8V-VM - Manual (Page 55)

2-19 ASUS K8V-VM Motherboard
CMD-ADDR Timing Mode [2T]
Configuration options: [1T] [2T]
ECC Configuration
DRAM ECC Enable [Disabled]
Allows you to enable or disable the DRAM ECC.
Configuration options: [Disabled] [Enabled]
ECC Configuration
DRAM ECC Enable [Disabled]
L2 Cache BG Scrub [Disabled]
Data Cache BG Scrub [Disabled]
MCA DRAM ECC Logging [Disabled]
Enables or disables the MCA DRAM ECC logging.
Configuration options: [Disabled] [Enabled]
ECC Chip Kill [Disabled]
Enables or disables the ECC Chip Kill function.
Configuration options: [Disabled] [Enabled]
DRAM SCRUB REDIRECT [Disabled]
Enables or disables the DRAM SCRUB REDIRECT.
Configuration options: [Disabled] [Enabled]
DRAM ECC allows
hardware to report
and correct memory
errors automatically
maintaining system
integrity.
Burst Length [4 Beats]
Sets the operating burst length.
Configuration options: [8 Beats] [4 Beats] [2 Beats]
Software Memory Hole [Enabled]
Enables or disables the software memory hole.
Configuration options: [Disabled] [Enabled]
DDR Reference Voltage [Auto]
Sets the DDR reference voltage.
Configuration options: [Auto] [2.6V] [2.5]
The following item appears when the DRAM ECC item is set to [Enabled].