One-touch (speed dial) – AT&T ATT 993 User Manual
Page 44

4
One-touch operation (speed dial)
Dial a one-touch number
If the auto speaker is turned on, numbers will be dialed
using the method selected in the
Set preferred mode
on page 2. If the preferred mode is
Headset but no
headset is connected, the number will be dialed using the
speakerphone.
Press and release a one-touch key.
— OR —
Press and release
LOWER, then press the desired one-touch
key. The number is dialed automatically and displayed on
the screen.
If Auto Speaker is turned off, or if you want to use
the handset or headset regardless of the auto speaker
programming:
Lift the handset.
— OR —
Press
SPEAKER.
— OR —
Press
HEADSET and listen for a dial tone.
Press and release a one-touch key.
— OR —
Press and release
LOWER, then press the desired
one-touch key.
The number is dialed automatically and is displayed on
the screen.
— OR —
While you are viewing the one-touch entry:
Press or until the screen display includes
DIAL.
Press
Enter.
NOTES:
For more information about the auto speaker setting, see
Turn auto
speaker on or off on page 9.
If there is a 30-second wait in the dialing sequence, press any dial
pad key or one-touch key to end the wait and continue the dialing
sequence.
.
2.
.
2.
.
2.
One-touch (speed dial)