AT&T ATT 993 - Manual (Page 22)

9
Telephone operation
Turn auto speaker on or off
Choose whether pressing a one-touch key while the
telephone is on hook automatically initiates a speed dial
call or displays the speed dial number without dialing. If
you want to automatically dial the speed dial numbers
by pressing a one-touch key without taking the handset
off hook first, set auto speaker to ON. To view the speed
dial numbers on screen, press a one-touch key while the
handset is on hook, and set the auto speaker to OFF. This
telephone comes with the auto speaker set to OFF. See
One-touch operation on page 38 for details about speed
dial.
NOTE: Auto speaker dials the desired number in the preferred mode
(see page 2). If the headset is not connected, the call is dialed
using the speakerphone.
Press ENTER to begin feature setup.
Press ENTER again. The screen displays ONE TOUCH
and PROGRAM.
Press until the screen display shows AUTO
SPEAKER and the current setting.
Press or to toggle between
OFF and ON.
When the desired setting is shown, press or ENTER
to save your choice.
When the screen displays
MAIN MENU, press and hold
ENTER to return to the idle screen.
Set the primary line
Press ENTER to begin feature setup.
Press until the screen displays PHONE SETTINGS.
Press ENTER. The screen displays PRIMARY LINE and
the current setting.
Press or to toggle between
LINE 1 and LINE 2.
When the desired line is displayed, press or ENTER
to save the setting. The screen displays ALS ON/OFF.
Proceed to step 5 of Turn automatic line selection on
or off on page 20 to set the next feature (Automatic
line selection).
— OR —
Press and hold
ENTER to return to the idle screen.
NOTE: When the telephone is off-hook, the primary line setting is
disabled.
.
2.
3.
4.
5.
6.
.
2.
3.
4.
5.
6.
ONE TOUCH
ON
AUTO SPEAKER
PHONE SETTINGS
LINE
PRIMARY LINE
ONE TOUCH
MAIN MENU
Feature setup