Wildgame Innovations VTX-D - Manual (Page 8)

8
Once you complete programming a single feed cycle,
press the “OK” button again and use the ▲ or ▼ buttons
to enter the next feeding. After you have completed your
programming press the “OK” button to move on.
Testing
To test the unit, press the ▼ button once to from “FEED”
mode to the “TEST” mode and press “OK”. The unit will
turn on after a 10 second delay, giving the user a chance
to STEP BACK from the feeder. The test will run for the
duration as set for the first feed time.