Goulds Pumps ANSI FAMILY IOM (ATEX Compliant) - Manual (Page 20)

18
ANSIFAM IOM - 5/08
NAMEPLATE INFORMATION
Every pump has two ITT Goulds nameplates that
provide information about the pump. The tags are
located on the casing and bearing frame. When ordering spare parts, you will need to identify
pump model, size, serial number, and the item number
of required parts. Information can be taken from the
pump casing tag. Item numbers can be found in this
manual.
.
Description Fig. No. Example
Pump Casing Tag - provides
information about the pump’s
hydraulic characteristics. Note the
format of the pump size: Discharge x
Suction - Nominal maximum Impeller
Diameter in inches. (Example: 2x3-8)
(Figs. 1 & 2).
Fig. 1
English
Fig. 2
Metric
Bearing Frame Tag - provides
information on the lubrication system
used (Fig. 3). Fig. 3
ATEX Tag - If applicable, your pump
unit may have the following ATEX tag
affixed to the pump and/or baseplate.
See the Safety section for a
description of the symbols and codes
(Fig. 4). Fig. 4