Minka Group F759-PBL - Manual (Page 19)

OPERATING THE REMOTE CONTROL/WALL TRANSMITTER
Restore Power to Ceiling Fan.
A. Buttons:
These buttons are used to set the fan speeds as follows;
D. OFF-ON Slide Button Wall Control Fans Only) (
This button turns the power Off and On to the Fan and
Light s).
(
Remote Control only: Install a A23 12 volt battery (included) . To prevent damage to transmitter remove the battery if not used for long periods of time.
C. Button:
Press and release the button to turn the light ON or OFF,
this fan's light will not dim.
= Low Speed
= Medium Speed
= High Speed
B. Button:
This button turns the fan off.
10
Speed settings for warm or cool weather depend on factors such as the room size. Ceiling height, number of fans, etc.
The Reverse switch is located on the switch cup. Slide the switch to the Left for warm weather operation. Slide the switch to the Right for cool
weather operation.
NOTE: Wait for fan to stop before changing the setting of the slide switch.