Minka Group F759-PBL - Manual (Page 18)

9 INSTALLING THE GLASS SHADE & LIGHT BULBS
WARNING:Shut of the power supply before removing or replacing lamp. If you accidentally
come into contact,wipe thoroughly with a clean,lint-free,cotton cloth. Use light bulb in accordance
with the fan’s specification.TO REDUCE THE RISK OF FIRE DO NOT EXCEED MAXIMUM WATTAGE
RATING.
ATTENTION:The Energy Policy Act of 2005 requires this fan to be equipped with a 190 watt
limiting device.If lamping execeeds 190 watts,the ceiling fan’s light kit will shut off automatically.
Step1. To install light kit glass shade, loosen the light kit screws and install the glass shade to the
light kit. Secure by tightening the light kit screws previously loosened.(Fig.18)
Step2. Install 3*60W E12 bulbs (included) into socket. (Fig.18)
Fig 18
Light kit assembly
Light kit screw
Glass shade
Blub