Minka Group F532-BWH - Manual (Page 20)

11
TROUBLESHOOTING
SYMPTOM
Fan Sounds Noisy
SOLUTION SYMPTOM
Fan Wobble
SOLUTION
Check fuses or circuit breakers.
Check line wire connections to fan and
switch wire connections in switch housing.
CAUTION: Make sure main power is off.
Check to make sure the reverse is set to
one side. If switch is located in the
middle it might not make proper
contact.
Allow a 24-hour "break-in" period. Most noises as
sociated with a new fan go away during this time.
Make sure all motor housing screws are snug.
Make sure the screws that attach the fan blade
bracket to the motor hub are tight.
Some fan motors are sensitive to signa ls from
solid-state variable speed controls. If you have
installed this type of control, choose and install
another type of control.
Check that all blade and blade holder screws
are secured.
If a Balancing kit is provided follow the
instructions included with the balancing kit to
help correct any excessive wobble.
NOTE: All Blade sets are grouped by weight.
Because blades vary in density, the fan may
wobble even though blades are weight matched.
SYMPTOM
Fan will not start
SOLUTION