Installing the mounting bracket – Minka Group F574-WH User Manual

Page 9

Text mode
Original mode

Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.

INSTALLING THE MOUNTING BRACKET

WARNING: All of the parts, hardware and components have been provided for your safety and the

proper installation of your new ceiling fan. The use of other parts, hardware or components not
supplied by Minka Aire

with the fan will void the Minka Aire

Warranty.

REMEMBER to turn off the power. Follow the steps below to hang your fan properly:

Step 1. Attach the mounting bracket to the outlet box with two screws provided with your outlet box.
Make sure the bracket is firmly secured. (Fig. 1)

Step 2. Lift fan into position by hanging the motor assembly onto the hook from the ceiling mounting
bracket allowing it to hang freely. (Fig. 1)

FIG. 1

OUTLET BOX

MOTOR

MOUNTING BRACKET

This manual is related to the following products:

F574-BNW