Installing the light bulb & glass shade – Minka Group F574-WH User Manual

Page 16

Fig. 9

GLASS
SHADE

100 W HALOGEN
BULB

WARNING: Shut of the power supply before removing or replacing lamp. In handling of halogen bulb,
care should be taken not to touch it with your bare hands. Oil residue will shorten the life of the
halogen bulb. If you accidentally come into contact, wipe thoroughly with a clean, lint-free, cotton cloth.
Allow the bulb to cool off for 10 minutes before changing the bulb. Use light bulb in accordance with the
fan's specification. TO REDUCE THE RISK OF FIRE DO NOT EXCEED MAXIMUM WATTAGE RATING.

Step 1. Install 1x100W halogen bulb (included).

Step 2. Raise glass shade up against bottom of fan housing and secure it to the fan by turning the glass

shade clockwise until snug. DO NOT OVERTIGHTEN. (Fig. 9)

NOTE: The metal light cover included with your fan is an option to replace the glass for the light in the

event that you prefer not to use the light feature of your fan. The metal light cover is not necessary for
the light operation; it can be saved for later use if desired.

INSTALLING THE LIGHT BULB & GLASS SHADE

This manual is related to the following products:

F574-BNW