Minka Group F514-BN - Manual (Page 23)

OPERATING THE REMOTE CONTROL/WALL TRANSMITTER
Restore Power to Ceiling Fan.
A. Buttons:
These buttons are used to set the fan speeds as follows;
= Low Speed
= Medium Speed
= High Speed
B. Button:
This button turns the fan off.
C. Button:
Press and release the button to turn the light ON or OFF,
this fan's light will not dim.
D. OFF-ON Slide Button Wall Control Fans Only) (
This button turns the power Off and On to the Fan and
Light s).
(
E. Button: Full Function Remote Control Units Only ( )
This button is used to change the direction of the
rotation of the blades; forward for warm weather or
reverse for warm weather.
NOTE: If your Remote Control or Wall Control does not
have a "
" button, Please look for a slide reverse switch
on the motor housing.
Remote Control only: Install a A23 12 volt battery (included) . To prevent damage to transmitter remove the battery if not used for long periods of time.
12