Minka Group F620-DBB - Manual (Page 16)

7
Fig 15
Fig 16
THE FOLLOWING OPERATION MUST BE ACCOMPLISHED
BEFORE INSTALLING THE LIGHT KIT.
Step 1. Attach the fan blades to the blade holders using the
screws and fiber washers provided, tighten screws
securely. (Fig. 15)
Step 2. Remove rubber stops from motor. Rotate motor so
that the screw holes are revealed through the opening on
switch cap plate. Align motor holes to blade holders and
secure with screws provided, tighten screws securely. (Fig.
16)
BLADE INSTALLATION
BLADE HOLDER
BLADE HOLDER
SCREWS
BLADE HOLDER
SCREWS
FIBER WASHERS
BLADE