Meteor Aurora 16 User Manual
Aura
Instructions:
AURA
AURA
AURA
AURA----16
16
16
16 Centerpiece
Centerpiece
Centerpiece
Centerpiece
Thank you for selecting
AURA 16
AURA 16
AURA 16
AURA 16
Centerpiece Light Effect
Centerpiece Light Effect
Centerpiece Light Effect
Centerpiece Light Effect.
Before installation and for your safety and better use of this product, please read this user’s manual
carefully and follow the instructions to protect yourself and others .
AURA 16 Centerpiece
AURA 16 Centerpiece
AURA 16 Centerpiece
AURA 16 Centerpiece Light Effect
Light Effect
Light Effect
Light Effect
adopts advanced design technology, using high grade optical
lenses, a powerful, long tested and reliable HMI 575 lamp to generate high precision and very bright
light output.
16 pieces of various dichroic filters color beams can create a multitude of color configurations.
The controller supplied with the unit has 8 built-in programs to chose from, controlling the 16 beams.
Also the controller incorporates Black Out, Audio, Auto functions, Speed and Pause etc.
SPECIFICATIONS:
Voltage:
AC
220V / 60Hz / (2 20V / 50Hz optional)
Power:
850W
Lamp:
HMI 575, OSRAM / IMPORT
Resistance: >2M
Control:
Signal Dedicated Controller
Color:
16 Colors +16 White Colors
Size:
44” wide x 26” high
Weight:
140 lbs. (unboxed)
SAFETY / INSTALLATION INSTRUCTION:
-
Manufacturer will not accept any liability for damages or bodily harm resulting from improper
installation or unauthorized modifications to the device.
-
Every person involved with installation, operation and maintenance of this device, must be
qualified, familiar with the instrument functions and follow the instruction manual .
Most of damages occur by improper installation and operation there after.
-
Before installation , please open and inspect the equipment for any possible damages caused
during transportation.
-
This product is for indoor use ONLY .
- Please install the device in a well-ventilated area.
- Please check that the fan and fan safety grill are not blocked .
- Install the fixture with proper hanging devises . For safety , always use Safety cables .
- Handle the power cord and all electrical connections to the mains with caution .
- Make sure that you have the correct operating voltage as stated on the unit .
- During installation and before connecting the device to the mains , make sure the main power is
turned OFF.
- Make sure that the device is properly grounded to avoid electric shock.
- DO NOT connect this device to a Dimmer Pack.
-
DO NOT switch the devise ON/OFF is short intervals as this will reduce lamp life and also will
cause damage to the lamp igniter.
-
During initial start up, some smoke or smell may arise .
(This is normal process with new devices and does not mean that the device is defective.)