Meteor ProMover 1200 CYM - Manual (Page 6)

9 PRISM TOTATION
10 PRISM STREAM
11 FIXATION GOBO
12 GOBO STREAM
13 GOBO ROTATION
14 CYAN
15 MAGENTA
16 YELLOW
17 GRADUAL CHANGE
18 PAN 16BIT
19 TILT 16BIT
20 GOBO FINE
Select the options by setting the microswitches as indicated:
Option
Function
1 ON Linear movement of the color wheel
OFF Stepped movement of the color wheel
2 ON Linear moving of the fixed gobo disc
OFF Stepped movement of the fixed gobo wheel
3 ON Lamp control enabled
OFF Auto light off after 5 min. of blackout disenabled
4 ON PAN Fine and TILT Fine control enable
OFF PAN Fine and TOLT Fine control disable
5 - PAN direction change
6 - TILT direction change
7 ON Gobo Fine control enable
OFF Gobo Fine control disable
8 ON CMY color mixing system selected
OFF RGB color-mixing system selected
9 - NOT USED
10 ON Display orientation for ceiling installation
OFF Display orientation for floor installation
11 - TEST
12 - If ON, there is Low Voltage Supply on output at DMX
signal input connector pin
TECHNICAL INFORMATION
Power supplies available
*Version with electronic ballast (with and without PFC):
-200-240V 50/60Hz
-100-120V 50/60Hz
*Version with electromagnetic ballast:
-230V 50Hz
-240V 50Hz
-20BV 60Hz
-200V 50Hz
-200V 60Hz
The projector is designed to operate at the mains frequency and voltage given on the
electrical data label of the appliance.