Quick Cable Quick Crimp Pneumatic Crimper - Manual (Page 6)

6
Brazed seam flag dies, lower
die on left.
The upper die is marked U.
The lower die is marked with
the gauge size.
Brazed seam dies in position.
7. Remove upper die
pin and die.
10. Insert upper die pin.
4. Grasp lower die, pull die
release handle.
8. Assemble B-crimp die set;
pull release handle.
11. Install spring and retaining
pin.
5. Remove die.
9. Install lower die.
12. Adjust guide plate so
connector is positioned
correctly in die.
6. Remove retaining pin and
spring from upper die pin.
Using Specialty Dies — The Brazed Seam Flag Die Set
Brazed seam flag connectors can be crimped with our Brazed Seam Flag Die Set (420579).
There is one universal upper die used for all gauges, and individual gauge size dies are used
in the lower die position.