j5 create JUA250 - USB 2.0 HDMI Display Adapter User Manual

Page 11

Text mode
Original mode

5. When Install Shield Wizard is complete, select “Yes, I want to restart my computer

now.” Click Finish to restart.

6. After rebooting connect the external display device (monitor/ projector) to the

HDMI connector or the DVI connector of USB Display Adapter and turn on the
display device.

7. Connect the USB Display Adapter into an available USB

port of a PC or Notebook,

After Inserting the USB Display Adapter into an USB

port, the “Installing device

driver software” message will pop up.

If the Driver software was installed successfully the following message should
appear:

If you’re not going to install another USB Display Adapter, restart your PC. The
functions of the USB Display Adapter will be activated after the computer restarted.