j5 create JUA350 - USB 3.0 HDMI Display Adapter - Manual (Page 22)

USB DISPLAY ADAPTER
USER MANUAL
21
Note:
If your internal graphics card is Dual Display Ports…..
1. When using one USB 3.0 Display Adapter
The display device which connected to the 2 nd HDMI port will be numbered 3 rd
monitor, the display device which connected to the USB 3.0 Display Adapter will be
numbered 2
nd monitor.
2. When using two USB 3.0 Display Adapter
The display device which a port to the 2 nd HDMI port will be numbered 4 th monitor,
the display device which connected to the USB 3.0 Display Adapter will be
numbered 2
nd and 3 rd monitor and so on…
Setup The Sound
Microsoft’s audio system restricts the audio function to one output at a time; therefore,
when using the USB HDMI multi-display adapter only one output will receive audio.
The following explains how to set-up and change the default sound output from the
display device connected with the USB 3.0 HDMI Display Adapter.
1. Go to “Control Panel> Sounds, Speech, and Audio Devices” and select “Changes
the speaker settings”.