Asus P/I-P55TVP4 - Manual (Page 15)

ASUS P/I-P55TVP4 User's Manual 9
III. INSTALLATION
(Jumpers)
III. INST
ALLA
TION
5. Voltage Regulator Output Selection (JP16-JP20)
These jumpers set the voltage supplied to the CPU. Determine whether your
CPU has a single power plane or dual power planes and then the voltage that it
uses. Current Intel CPU's marked "Pentium" has only a single power plane and
uses the standard 3.38 volts (STD) or 3.5 volts (VRE). When a single power
plane CPU is installed, the dual power plane selections will be automatically
disabled. When a dual power plane CPU is installed, the single power plane
selections will be automatically disabled. You may have one jumper on the
Single Power Plane and another on the Dual Power Planes at the same time.
Single Power Plane Type Voltage Dual Power Planes Voltage
JP17 [short] VRE 3.5V JP20 [short] 2.88V
JP16 [short] (Default) STD 3.38V JP19 [short] 2.7V
JP18 [short] (Default) 2.8V
Voltage Regulator Output Selection
JP20
JP19
JP18
JP17
JP16
(Default)
Cyrix CPU Identification (for compatible Cyrix CPU's)
The Cyrix CPU that is supported on this motherboard is labeled Cyrix 6x86 P166+
but must be Revision 2.7 and later. Look on the underside of the CPU for the serial
number. The number should read G8DC6620A or larger.