beautypg.com

Iii. installation, Jumper settings – Asus P/I-P55TVP4 User Manual

Page 13

background image

ASUS P/I-P55TVP4 User's Manual

7

III. INSTALLATION

III. INST

ALLA

TION

(Jumpers)

Jumper Settings

1. Onboard Multi-I/O Selection (JP9)

You can selectively disable each onboard Multi-I/O item (floppy, serial, paral-
lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis-
able all Multi-I/O items at once with the following jumper in order to use your
own Multi-I/O card.

Selections

JP9

Enable

[1-2] (Default)

Disable

[2-3]

1

Multi I/O Setting (Enable / Disable)

2
3

JP9

Enable (Default)

Disabled

1
2
3

JP9

2. Flash ROM Boot Block Programming (JP10)

This sets the operation mode of the boot block area of the Programmable Flash
ROM to allow programming in the Enabled position. This is required only if
prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.

Programming

JP10

Disabled

[1-2] (Default)

Enabled

[2-3]

Boot Block Programming (Disable / Enable)

Disabled / Protected
(Default)

Enabled

1
2
3

JP10

1
2
3

JP10