MEGUIAR'S M135 User Manual
Page 3

M135, Synthetic Spray Detailer (20-163B): M13501, M13516
__________________________________________________________________________________________
Page: 3 of 10
SECTION 5: Fire-fighting measures
5.1. Extinguishing media
Material will not burn.
5.2. Special hazards arising from the substance or mixture
None inherent in this product.
5.3. Advice for fire-fighters
No unusual fire or explosion hazards are anticipated.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Ventilate the area with fresh air. Observe precautions from other sections.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled
material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with
water. Seal the container. Dispose of collected material as soon as possible.
6.4. Reference to other sections
Refer to Section 8 and Section 13 for more information
SECTION 7: Handling and storage
7.1. Precautions for safe handling
For industrial or professional use only. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not eat, drink or smoke when
using this product. Wash thoroughly after handling.
7.2. Conditions for safe storage including any incompatibilities
No special storage requirements.
7.3. Specific end use(s)
See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and
personal protection recommendations.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational exposure limits
Ingredient
CAS Nbr
Agency
Limit type
Additional comments
Propan-2-ol
67-63-0
Health and
Safety Comm.
(UK)
TWA:999 mg/m³(400
ppm);STEL:1250 mg/m³(500
ppm)
Health and Safety Comm. (UK) : UK Health and Safety Commission
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
ppm: parts per million