MEGUIAR'S MV85 - Manual (Page 14)

MV85, Low-Emission Mold Seal & Release (XP4-53A): MV8501, MV8505
__________________________________________________________________________________________
Page: 14 of 16
13.1 Waste treatment methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations
Dispose of waste product in a permitted industrial waste facility. Empty drums/barrels/containers used for transporting and
handling hazardous chemicals (chemical substances/mixtures/preparations classified as hazardous as per applicable
regulations) shall be considered,stored,treated & disposed of as hazardous wastes unless otherwise defined by applicable
waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal
facilities.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of the
manufacturer, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC -
2000/532/CE and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional
regulations are complied with and always use a licensed waste contractor
EU waste code (product as sold)
20 01 13* Solvents
SECTION 14: Transportation information
ADR: UN1268 Petroleum distillates, N.O.S., Class 3, PG III, F1, (D/E) FP: +040.6
IMDG: UN1268 Petroleum distillates, N.O.S., Class 3, PG III, EmS:F-E, S-E
IATA: UN1268 Petroleum distillates, N.O.S., Class 3, PG III
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Carcinogenicity
Ingredient CAS Nbr Classification Regulation
Ethylbenzene 100-41-4 Grp. 2B: Possible human
carc. International Agency
for Research on Cancer
Toluene 108-88-3 Gr. 3: Not classifiable International Agency
for Research on Cancer
Global inventory status
Contact manufacturer for more information The components of this material are in compliance with the provisions of
Australia National Industrial Chemical Notification and Assessment Scheme (NICNAS). Certain restrictions may apply.
Contact the selling division for additional information. The components of this material are in compliance with the
provisions of Japan Chemical Substance Control Law. Certain restrictions may apply. Contact the selling division for
additional information. The components of this product are in compliance with the chemical notification requirements of
TSCA.
15.2. Chemical Safety Assessment
Not applicable
SECTION 16: Other information
List of relevant H statements
EUH066 Repeated exposure may cause skin dryness or cracking.
H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.