Asus L1N64-SLI WS - Manual (Page 82)

-22 Chapter : BIOS setup
4.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may
cause system to malfunction.
Memory Controller
SouthBridge Configuration
Memory Options &
Information
Memory Controller
Memory Setting: 533MHz-4.0-4-4-12-2T
Memclock Mode [Auto]
CAS Latency (CL) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
1T/2T Memory Timing [2T]
MCT Timing Mode [Auto]
Bank Interleaving [Auto]
Node Interleaving [Auto]
DQS Signal Training Control [Enabled]
MemClk Tristate C3/ATLVID [Disabled]
CS Sparing Enable [Disabled]
Memory Hole Remapping [Enabled]
Power Down Control [Disabled]
Memory Options &
Information
Memclock Mode [Auto]
[Auto] allows the BIOS to set the memclock mode automatically. [Limit] or
[Manual] allows you to select from any of the standard values.
Configuration options: [Auto] [Limit] [Manual]
The following item appears when the Memclock Mode item is set to [Limit] or
[Manual].
Memclock Value [400 MHz]
Allows you to set the memclock value.
Configuration options: [400 MHz] [533 MHz] [667 MHz] [800 MHz]