KEMP Cisco C-Series - Manual (Page 13)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 13 / 18
LoadMaster for Cisco C-Series Installation
Installation Guide
10. If your machine has shipped with a temporary license, a warning will appear informing
that a temporary license has been installed on the machine and for how long the license
is valid.
Figure 2-9 Temporary license warning
Click the OK button.
11. The Appliance Vitals screen of the LoadMaster should appear.
Figure 2-10 Appliance Vitals screen
12. Click the System Configuration menu option.
13. Click the eth0 menu option within the Interfaces section.
Figure 2-11 Network Interface screen
14. In the Network Interface 0 screen, enter the IP address of the eth0 interface (the
network-facing interface of the LoadMaster) in the Interface Address input field.
15. Click the Set Address button.
16. Click the eth1 menu option within the Interfaces section.
17. In the Network Interface 1 screen, enter the IP address of the eth1 interface (the farm-
side interface of the LoadMaster) in the Interface Address input field.