Rhin-O-Tuff OD4012 - Manual (Page 7)

5
Placing your machine in the proper location:
u Before lifting machine, turn power off and
remove the power cord from the wall outlet.
The machine is very heavy! Never attempt to lift
the machine by yourself. Two people will be
needed to lift the machine.
u Place the machine on a hard level surface, place the foot pedal on the
floor in front of the machine. Ensure the placement of machine allows
for ergonomic work flow (separate locations for un-punched books and
punched books).
u
u
Connect the foot-pedal into the foot-pedal
receptacle on the back of the machine, do not
attempt to connect foot-pedal into anything other
than the foot-pedal receptacle.
paper activated switches are available
for these punches. These switches replace the foot-pedal and plug
into the foot-pedal receptacle on the back of the machine.
Optional
Lifting Hazard
Single person
lift could result
in injury.
Two person lift required.
! CAUTION
u Turn power switch off before maintaining or
changing die assembly.
! WARNING
Crush hazard.
Keep hands away
from moving parts.
Lockout and disconnect
power before servicing.
! CAUTION
Cutting Hazard
Injury to fingers
and hands.
Use hand protection
u Use of appropriate hand protection should be
utilized to avoid injury from handling of materials.
u Follow all recommended workplace procedures for repetitive activities.
! CAUTION
Tripping Hazard
Bodily injury could
occur from fall.
Route cables away
from walkways