Allied Telesis R800 Series - Manual (Page 19)

Patch 86222-22 For Rapier Switches and AR800 Series Modular Switching Routers 19
Patch 86222-22 for Software Release 2.2.2
C613-10319-00 REV U
The first periodic after day trigger boundary (i.e. midnight) did not occur.
A range check error occurred due to an incorrect comparison. These issues
have been resolved.
Stopping a trace route using STOP TRACE occasionally caused a fatal error.
This issue has been resolved.
IGMP reflooded packets with VLAN tagging were not processed correctly.
This issue has been resolved.
Features in 86222-11
Patch file details for Patch 86222-11 are listed in Table 11.
Table 11: Patch file details for Patch 86222-11.
Patch 86222-11 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
When a Rapier CPU was handling a large amount of traffic and a busy
egress port went down, it was possible for the transmission of packets by
the CPU to cease. This issue has been resolved.
When trunking was in operation, in some instances the switch transmitted
tagged packets on untagged trunk ports. This issue has been resolved.
When a switch port was forced to half duplex mode and the link partner
was forced to full duplex mode, it was possible for the switch to enter a state
where it was unable to transmit packets. This issue has been resolved.
PCR: 02008 Module: TRIGGER Network affecting: No
PCR: 02011 Module: PING Network affecting: No
PCR: 02012 Module: IPG, VLAN, SWI Network affecting: No
Base Software Release File 86s-222.rez
Patch Release Date 19-Dec-2001
Compressed Patch File Name 86222-11.paz
Compressed Patch File Size 296244 bytes
PCR: 01243 Module: SWI Network affecting: No
PCR: 01265 Module: SWI Network affecting: No
PCR: 01288 Module: SWI Network affecting: No