NaceCare Solutions TP400F - Manual (Page 5)

5
6. Connect the hose and the hand tool to the machine body.
7. Connect the plug of the machine to a properly grounded electrical socket. Switch the
solution pump on by moving the switch to the position “I”. The pump switch is situated on
the pump and vacuum motor control panel.
8. Switch the air compressor on by moving the switch to the position “I”. The compressor
switch is located on the foam regulation control panel. The compressor will run until full
tank pressure is reached (Approx. 1 minute). After this, the compressor motor will only
turn on to recharge the tank.