NaceCare Solutions NR1520 - Manual (Page 6)

6
MACHINE PREPARATION
PREPARING THE MACHINE FOR FIRST USE
Upon delivery of the machine, please ensure that the
owner’s manual is read thoroughly. If there is multiple
users for the machine, ensure that they have a full
understanding of how to use the machine in a safe
manner.
ABRASIVE PAD DRIVER ASSEMBLY
WARNING:
When installing the pad driver/brush by hand,
ensure that the power source is disconnected.
Installing the pad driver/brush with the machine
plugged in could cause serious injury.
Lay the machine on the floor so it is resting on the handle.
With the appropriate handle (1) unscrew (counter
clockwise rotation) the lock nut (2), install the abrasive
pad on the flange. With one hand hold the pad, with the
other hand screw the lock nut back on to the machine
(clockwise rotation). Return the machine back to it’s
upright position.
By pulling the lever (A), drop the handle till the operator’s
arms are slightly bent.
With your thumb push the safety switch down (B). Pull the
motor lever (C) to turn the motor on.
Note:
When the handle is in the upright position, the machine
can not run. There is an internal safety switch to prevent
the machine from running in this position.
1
2