NaceCare Solutions DP620 - Manual (Page 19)

19
Fig. 18
Fig. 19
а
а
Fig. 17
CLEANING THE MACHINE
Remove the three tanks (fig. 17). Use a
damp sponge to carefully clean the
rubber conveyor belts and every part of
the machine itself.
Use a brush to remove every residue of
dirt from all the corners.
Dry well.
Do not use high pressure water jet machines to wash the machine.
CLEANING THE TANKS
The three thanks (the dirty water recovery one and the two containing the
clean water and the detergent) can be washed in running water under the tap.
Make sure that no foreign bodies remain inside the rubber valves located in
the two tanks which make the washing liquid exit. Any dirt could prevent
them from closing meaning that the liquid will continue to exit.
After having extracted the screws (fig. 18) remove the nozzles from the tanks.
Hold then in the middle and pull upwards (fig. 19), extracting them from
their side housings.