NaceCare Solutions DP620 - Manual (Page 16)

16
This procedure can be carried out with every type of brush supplied except
the brown horsehair brushes.
After washing particularly dirty floors and before carrying out any other
type of process on delicate floors, clean the brushes and the machine well
(see pages 17 and 19).
STOPPING THE OPERATIONS
Every time the handle is moved into the vertical REST position the machine
will immediately come to a halt. Each time the machine stops, it will be
necessary to move the register (fig. 6) to the “rest translation” position.
TRANSLATION
In order to be transported from one room to another, or put it away, the
DUPLEX moves on four sliding castors that raise it up automatically. In
order to ensure that the castors remain firmly fixed in this position, move the
handle of the machine into the “vertical” rest position, and the register (fig.
6) to the “rest translation” position; then lower the handle to either of the two
sides, and then push the machine which will roll along on its castors.
TROLLEY FOR SUPPLEMENTARY TRANSLATION
(Option for going up or down steps and
for transporting the machine from one
room to another with different level floors)