NaceCare Solutions TP18SX - Manual (Page 3)

3
Remove two screws (top right and bottom right)
from machine plate as shown.
Attach chemical mounting bracket as shown with
longer screws and washers provided with kit
hardware
**IF NEEDED
On left side of top tank, use mounting bracket as a
template drill through the tank.
With rivets and washers provided, insert rivet into
bracket/tank.
Hold washer on inside of the tank, ensuring it is held
tightly against the tank.
Using rivet gun install rivet and make sure rivet grabs
washer tightly against the tank.
**washer prevents rivets from coming loose**