NaceCare Solutions TP8X - Manual (Page 5)

5
Mounting for models AV12QX, and AV18AX
To mount the heater to the AV12QX, or AV18AX, Follow these instructions:
1. Mount the 2 metal brackets on the control panel as indicated in the picture, by using the 2
screws (M4x20) provided.
2. Mount the heater to the 2 metal brackets, vertically, as indicated in the picture. Hang the heater
on the bracket by inserting the screws coming out of the rear side of the heater into the holes
of the brackets. Lock the heater using the 2 x 6mm lock nuts.