頁面 9 – MIPRO MR-823 Dual-Channel Diversity Receiver User Manual
Page 9

GT/MT Level Selector: Guitar/Microphone Selector.
GT- For electric guitar/bass instrument cable. Gain Control is irrelevant for “GT”
mode.
MT- For a variety of lavaliere and headworn microphone cables. Gain Control works
in the “MT” mode for input sensitivity adjustments
Battery Compartment: Holds 2 “AA” (1.5V) batteries.
Detachable Belt Clip: Allows the transmitter to be worn on a belt, waistband or
guitar strap for a 360 degrees rotating. To detach simply use a screwdriver at a 45
degree angle to unfasten. See Figure 11.
Transmitting Antenna: 1/ 4 wavelength transmitting antenna.
Housing: Holds the transmitter PCB and battery compartment.
Gain Control: Adjusts the input gain to an appropriate level.
12
13
Bodypack Transmitter
Bodypack Transmitter
(Figure 10)
30
31
32
33
34
35
36
38
37
4-Pin AF Jack Input Connector: Connects to the MIPRO TA4F XLR connector. For
lavaliere, headworn microphone or instrument cable. (See 5 methods of AF Input
Connections in Figure 13)
Power On/Off Switch: Turns the transmitter on and off.
Battery Status Indicator: Indicates power on / off and the battery status.
When the Power On/Off Switch is turned on:
35
36
37
38
(Figure 11)
!
Normal Battery Red indicator glows briefly and dims.
!
Low Battery Red indicator glows. Replace batteries.
!
Drained Battery Red indicator does not glow. Replace batteries.
!
Battery not properly Installed Red indicator does not glow.
PART NAMES AND FUNCTIONS
30
31
32
33
34