頁面 10, Af 4-pin input connection methods, Operating instructions – MIPRO MR-823 Dual-Channel Diversity Receiver User Manual
Page 10: Bodypack transmitter
14
15
Bodypack Transmitter
Bodypack Transmitter
AF 4-PIN INPUT CONNECTION METHODS
1.
Turn the transmitter on.
2.
With a normal battery, the red indicator glows briefly and dims when the transmitter
is turned on. See Battery Status Indicator for other indications.
3.
When the performance is over, turn off the transmitter to conserve battery power.
! Select GT/MT Switch :
GT- For electric guitar/bass instrument cable. Gain Control is irrelevant for “GT”
mode.
MT- For a variety of lavaliere and headworn microphone cables. Gain Control works
in the “MT” mode for input sensitivity adjustments.
! Gain Control : Volume can be adjusted by the gain control. Gain Control is
irrelevant when switch to GT position.
! 4-Pin Connector: Before making these connections turn off the transmitter to
prevent damage to transmitter, receiver or speaker system. Align and insert the 4-
pin plug into the connector accordingly and tighten in a clockwise direction
illustrated in Figure 12. When done, turn the transmitter on.
(Figure 12)
OPERATING INSTRUCTIONS
The ridge on the
connector must match
the indentation on the
socket when inserting.
Capsule Connector
Lavalier
Headset
2-Wire Electret Condenser Microphone Capsule
3-Wire Electret Condenser Microphone Capsule
Dynamic Microphone
Electric Guitar
Line-in (impedance 8KΩ attenuation 10dB)
AUDIO
SHIELD
4
3
2
1
PIN
SHIELD
AUDIO
BIAS
3
4
PIN
1
2
AUDIO
SHIELD
1
4
3
2
PIN
SHIELD
AUDIO
3
2
1
PIN
4
3
2
1
SHIELD
AUDIO
1
3
4
2
PIN
1
3
4
2
1
3
4
2
1
3
4
2
1
3
4
2
1
3
4
2
34
35
35
34
(Figure 13)