頁面 8 – MIPRO ACT-70H Wideband Handheld Transmitter User Manual

Page 8

Setting RF Output Power

2 RF Output Power Levels: RF-HI and RF-LOW.

Press MODE button until RF POWER mode

appears.

Press SET button once to activate function.

Press SET button to select the desired RF output

power.

Press MODE button to confirm and save the

change, or LCD will stop flashing after 5 seconds

and parameter will be saved.

MUTE MODE

MUTE MODE: Select from MANUAL and

DISABLE.

Press MODE button until MUTE MODE appears.

Press SET button once, the LCD screen starts

flashing to denote it is ready to accept mode

changes. Press SET button to change between

MANUAL and DISABLE in cycle. Press MODE

button to confirm and save the change, or LCD

will stop flashing after 5 seconds and parameter

will be saved.

MUTE button is operable when MUTE MODE is

set in MANUAL mode.

MUTE button is not operable when MUTE

MODE is set in DISABLE mode.

RF-HI

RF POWER

RF-LOW

RF POWER

DISABLE

MUTE MODE

MANUAL

MUTE MODE

Wideband Handheld Transmitter