MIPRO ACT-70H Wideband Handheld Transmitter - Manual (Page 5)

! Channel identification clip can be attached to the
bottom of protection cover.
Protection cover's patented design protects
accidental access to power switch and its rugged
material and snug fit offer protection to both power
switch and PCB during accidental drop.
Steps:
! Remove protection cover and turn it 180-degree.
! Install the protection cover after turning will
cover up power switch.
Mute function is open for easy acsess.
! When power is off, reverse-installation of
protection cover will turn on the switch
automatically. To turn off the system, remove
the cover to turn off.
! Protection cover must be attached during
operation for full protection.
Patented Protection Cover
4 5
Wideband Handheld Transmitter Wideband Handheld Transmitter