MIPRO ACT-80T Wideband Digital Miniature Bodypack Transmitter - Manual (Page 14)

External mute connector
External Mute Connector
MJ-70 External Mute Switch (optional)
! External mute connector is a 3.5mm jack. When
an external mute switch cable, MJ-70 (optional)
is connected, user can manually mute and un-
mute the audio temporary.
3.5mm jack.
External mute switch on/off button.
Note: Plug in the device before power on the
bodypack transmitter.
18
19
18
19
Digital Bodypack Transmitter Digital Bodypack Transmitter
24 23
M U T E
AF MUTE
GRP CH
485.000
MHz
FREQUENCY
AF MUTE
N O
ENCRYPTION
Y E S
AF LIMIT
INVERT
AF PHASE
485.000
MHz
FREQUENCY
0 dB
AF GAIN
LOW CUT
AF LOW-CUT
(GROUP/CHANNEL) (AF GAIN) (FREQUENCY)
(AF LOW-CUT) (AF LIMIT)
(AF PHASE)
(ENCRYPTION)
AF MUTE
UNLOCK
SET LOCK
(SET LOCK)
(MUTE MODE)
AF MUTE
AF MUTE
AF MUTE
AF MUTE
AF MUTE
AF MUTE
AF MUTE
RF-LOW
RF POWER
(RF POWER)
AF MUTE
MUTE Control Set-Up
MUTE control enables audio to be muted or un-
muted temporarily.
Press MUTE button to mute audio temporarily.
Parameter values can be changed and ACT sync
activate during this MUTE mode.
Press MUTE button to un-mute.
!
!
AF MUTE
0 1 0 2
GRP CH
MANUAL
MUTE MODE