頁面 5 – MIPRO ACT-80H Wideband Digital Handheld Transmitter User Manual

Page 5

Protection cover's patented design protects

accidental access to power switch and its rugged

material and snug fit offer protection to both power

switch and PCB during accidental drop.

Steps:

Remove protection cover and turn it 180-degree.

Install the protection cover after turning will

cover up power switch.

Mute function is open for easy acsess

When power is off, reverse-installation of

protection cover will turn on the switch

automatically. To turn off the system, remove

the cover to turn off.

Protection cover must be attached during

operation for full protection.

Patented Protection Cover

Wideband Digital Handheld Transmitter

Operating Instructions for Insertion &

Removing Battery

Caution:

Remove the batteries if unused for a long period

of time to prevent battery leakage, corrosion and

causes damage to electronics.

Turn the microphone housing and pull it toward

capsule grille to expose battery compartment.

Insert two new AA alkaline batteries in the

battery compartment with correct polarity

orientation.

Turn power switch to ON position after battery

installation. If LCD does not lit, please check

battery polarity or change to fresh batteries.