Fagor FQ8965X - Manual (Page 17)

17
PLUG IN THE REFRIGERATOR
Before plugging in the refrigerator, make sure the ice maker
power switch is set to the O (off) position�
See the grounding information attached to the power cord�
Note: The image can be different from your product.
PUT THE REFRIGERATOR IN PLACE
Move the refrigerator to its final location�
LEVEL THE REFRIGERATOR
The refrigerator can be leveled by adjusting the rollers
located near the bottom hinges�
Rollers have three purposes:
• Rollers adjust so the door closes easily when opened
about halfway� (Raise the front about 5/8” [16 mm] from
the floor.)
• Rollers adjust so the refrigerator firmly positioned on
the floor and does not wobble�
• Rollers allow you to move the refrigerator away from
the wall for cleaning�
To adjust the rollers:
• Turn the roller adjusting screws clockwise to raise the
refrigerator, counterclockwise to lower it� Use a 3/8”
hex socket or wrench, or an adjustable wrench�
LEVEL THE DOORS
Adjust the refrigerator door to make the doors even at the
top�
To align:
• Using a 7/16” wrench, turn the door adjusting screw to
the right to raise the door, to the left to lower it�
Note: A nylon plug, imbedded in the threads of the pin, prevents
the pin from turning unless a wrench is used.
• After one or two turns of the wrench, open and close
the refrigerator door and check the alignment at the
top of the doors�