Decolav 5230 - Manual (Page 8)

CAMERON MODULAR SERIES
Customer Service: 561-274-2110
www.decolav.com LET YOUR DREAMS COME ALIVE, YOUR PASSIONS
BECOME REALITY, BE THE ENVY OF YOUR NEIGHBORS ®
8
o Place the sink on the bottom side of the top.
o Apply the mounting clips and snug them slightly.
o Center the sink in the cutout (it may be necessary to look at counter from top side thats why the the
clips are to be used in this step)
o When Sink is in the desired location, using a magic marker make an outline around the sink on to
the top.
o Loosen the clips and remove the sink, apply silicone to the area inside the outline you just made.
o Place sink onto the under side of the top, align sink with the outline.
o Tighten mounting clips and check for proper alignment.
o If alignment is satisfactory, wipe up excess silicone and let cure per silicon manufacturers
reccomendations
Step #2
Figure G
Brass Insert
Mounting Clip
Washer
Mounting Screw
Sink
Vanity
Top
Installing the Sink to the Vanity Top