Beijer Electronics DT1151 EN - Manual (Page 14)

Technical Data
14 Mitsubishi Electric, MA00856
3.2 Operation Messages
The following operation messages will be displayed under different
circumstances:
Main
Menu
Sub Menu Function
OSD Menu Language Select the language of OSD Menu:
English/French/German/Spanish/Italian/Danish
OSD H.Pos Adjust horizontal position of OSD Menu by value
OSD V.Pos Adjust vertical position of OSD Menu by value
OSD Timer Set the duration time of the OSD Menu (OSD turn-off
time)
Translucent Set OSD Menu to translucent or opaque
Exit
Exit to main menu
Main
Menu
Sub Menu Function
Misc. Signal Source Select input signal source
Analog RGB/DVI
Mode Select Select DOS 640 (graphic) or DOS 720 (text) input
mode
Reset Initial set up (factory setting)
Volume Adjust volume
Exit Exit to main menu
Operation
message
Explanation
AUTO TRACKING Auto Tracking (analog RGB mode):
Executes auto function
NO SIGNAL Self diagnostics (analog RGB mode):
No input signal after power-on with power switch.
The message will disappear after 10 seconds of activity of
input signal.
NO SUPPORT Out of Range:
The input signal exceeds the supported range.